Onkyo BD-SP308 - Manual (Page 39)

39
En
Audio Output Specifications
*1 The secondary and interactive audio may not be included in
the output bitstream if “Digital Output” or “HDMI” option is
set to “Primary Pass-Thru”. (Except LPCM Codec: the out-
put always includes interactive and secondary audio.)
*2 This player automatically selects the HDMI audio according
to the decoding capability of the connected HDMI device
even though “HDMI” option is set to “Primary Pass-Thru”.
*3 The “PCM Multi-Ch”/”Primary Pass-Thru” setting of the
“HDMI” option and “DTS Re-Encode” setting of the “Digi-
tal Output” option cannot be set together. If you set them
together, the “HDMI” or “Digital Output” option is set to
“PCM Stereo” automatically.
*4 On the PCM audio output, the sampling frequency of DIGI-
TAL AUDIO OUTPUT is limited to 96 kHz.
*5 If the “HDMI” or “Digital Output” option is set to [DTS
Re-Encode], the audio output is limited to 48 kHz and 5.1Ch.
If the “HDMI” or “Digital Output” option is set to “DTS
Re-Encode”, the DTS Re-encode audio is output for
BD-ROM discs, and the original audio is output for the other
discs (like “Primary Pass-Thru”).
• If “HDMI” option is set to “PCM Multi-Ch” and “Dig-
ital Output” option is set to “Primary Pass-Thru”
while playback Dolby Digital Plus or TrueHD audio,
DIGITAL AUDIO OUTPUT is limited to “PCM 2ch”.
• If the HDMI connection is version 1.3 and Dolby Digital
Plus/Dolby TrueHD is output from HDMI OUT jack,
DIGITAL AUDIO OUTPUT jack is limited to “PCM
2ch” (When the HDMI and DIGITAL AUDIO OUT-
PUT are connected simultaneously).
• The audio is output as PCM 48 kHz/16 bit for MP3/
WMA file and PCM 44.1 kHz/16 bit for Audio CD while
playback.
• The Dolby TrueHD audio recorded on some Blu-ray
discs consists of Dolby Digital and TrueHD audio.
Dolby Digital audio is output through DIGITAL AUDIO
OUTPUT jacks and “DD” displays on the screen if
TrueHD audio is not output (for example, when
“HDMI” is set to “PCM Stereo” and “Digital Output”
is set to “Primary Pass-Thru”).
• You must select a digital audio output and a maximum
sampling frequency that your Amplifier (or AV receiver)
accepts using “Digital Output”, “HDMI” and “Sam-
pling Freq.” options on the “Setup” menu (
➔ 20).
• With digital audio connection (DIGITAL AUDIO OUT-
PUT or HDMI), Disc Menu button sounds of BD-ROM
may not be heard if the “Digital Output” or “HDMI”
option is set to “Primary Pass-Thru”.
• If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will pro-
duce a strong, distorted sound or no sound at all.
• Multi-channel Digital Surround Sound via digital con-
nection can only be obtained if your receiver is equipped
with a Digital Multi-channel decoder.
Analog 2CH Output Digital Output (DIGITAL AUDIO OUTPUT) *4
PCM Stereo DTS Re-encode *3*5 Primary Pass-Thru
Dolby Digital PCM 2ch PCM 2ch DTS Dolby Digital
Dolby Digital Plus PCM 2ch PCM 2ch DTS Dolby Digital
Dolby TrueHD PCM 2ch PCM 2ch DTS Dolby Digital
DTS PCM 2ch PCM 2ch DTS DTS
DTS-HD PCM 2ch PCM 2ch DTS DTS
Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch
Linear PCM 5.1ch PCM 2ch PCM 2ch DTS PCM 2ch
Linear PCM 7.1ch PCM 2ch PCM 2ch DTS PCM 2ch
HDMI OUT
PCM Stereo PCM Multi-Ch *3 DTS Re-encode *3*5 Primary Pass-Thru *1*2*3
Dolby Digital PCM 2ch PCM 5.1ch DTS Dolby Digital
Dolby Digital Plus PCM 2ch PCM 5.1ch DTS Dolby Digital Plus
Dolby TrueHD PCM 2ch PCM 5.1ch DTS Dolby TrueHD
DTS PCM 2ch PCM 5.1ch DTS DTS
DTS-HD PCM 2ch PCM 7.1ch DTS DTS-HD
Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch
Linear PCM 5.1ch PCM 2ch PCM 5.1ch DTS PCM 5.1ch
Linear PCM 7.1ch PCM 2ch PCM 7.1ch DTS PCM 7.1ch
Jack/Setting
Source
Jack/Setting
Source