Onkyo BD-SP308 - Manual (Page 20)

20
En
1080p Display Mode
When the resolution is set to 1080p, select “24 Hz” for
smooth presentation of film material (1080p/24 Hz) with a
HDMI-equipped display compatible with 1080p/24 Hz
input.
Note
• When you select “24 Hz”, you may experience some picture dis-
turbance when the video switches video and film material. In this
case, select “60 Hz”.
• Even when “1080p Display Mode” is set to “24 Hz”, if your TV
is not compatible with 1080p/24 Hz, the actual frame frequency
of the video output will be 60 Hz to match the video source for-
mat.
HDMI Color Setting
Select the type of output from the HDMI OUT jack. For
this setting, please refer to the manuals of your display
device.
`
YCbCr:
Select when connecting to a HDMI display device.
`
RGB:
Select when connecting to a DVI display device.
Black Level
With this setting you can adjust the picture blackness for
the analog video outputs. It does not affect the component
video output.
`
0 IRE:
Blacks are darker, and the entire picture becomes
darker.
`
7.5 IRE:
Blacks are lighter, and the entire picture becomes
lighter.
Display Menu
Select a language for the “Setup” menu and on-screen dis-
play.
Disc Menu/Disc Audio/Disc Subtitle
Select the language you prefer for the audio track (disc
audio), subtitles, and the disc menu.
`
Original:
Refers to the original language in which the disc was
recorded.
`
Other:
Press ENTER ( ) to select another language. Use
number buttons then press ENTER ( ) to enter the
corresponding 4-digit number according to the lan-
guage code list (
➔
36).
`
Off (Disc Subtitle only):
Turn off Subtitle.
Note
• Depending on the disc, your language setting may not work.
Each disc has a variety of audio output options. Set the
player’s Audio options according to the type of audio sys-
tem you use.
Note
• Since many factors affect the type of audio output, see “Audio
Output Specifications” for details ( ➔ 39).
HDMI / Digital Output
Select the output sound format when a device equipped
with a HDMI or Digital Audio input jack is connected to
the HDMI OUT or DIGITAL AUDIO OUTPUT jack on
this player.
`
PCM Stereo:
Select if you connect this unit’s HDMI OUT or DIG-
ITAL AUDIO OUTPUT jack to a device with two-
channel digital stereo decoder.
`
PCM Multi-Ch (HDMI only):
Select if you connect this unit’s HDMI OUT jack to
a device with multi-channel digital decoder.
`
DTS Re-Encode:
Select if you connect this unit’s HDMI OUT or DIG-
ITAL AUDIO OUTPUT jack to a device with DTS
decoder.
`
Primary Pass-Thru:
Select if you connect this unit’s DIGITAL AUDIO
OUTPUT and HDMI OUT jack to a device with
LPCM, Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS and DTS-HD decoder.
Note
• When “HDMI” option is set to “PCM Multi-Ch”, the audio
may output as PCM Stereo if the PCM Multi-Ch information is
not detected from HDMI device with EDID.
• If the “HDMI” or “Digital Output” option is set to “DTS
Re-Encode”, the DTS Re-encode audio is output for BD-ROM
discs with secondary audio and the original audio is output for
the other discs (like “Primary Pass-Thru”).
Sampling Freq. (Digital Audio Output)
`
192 kHz:
Select this if your AV receiver is capable of handling
192 kHz signals.
`
96 kHz:
Select this if your AV receiver is not capable of han-
dling 192 kHz signals.
When this choice is made, this unit automatically
converts any 192 kHz signals to 96 kHz so your sys-
tem can decode them.
`
48 kHz:
Select this if your AV receiver is not capable of han-
dling 192 kHz and 96 kHz signal. When this choice
is made, this unit automatically converts any 192
kHz and 96 kHz signals to 48 kHz so your system
can decode them.
Check the documentation for your AV receiver to verify its
capabilities.
LANGUAGE Menu
AUDIO Menu