Olevia LT42HVi User Manual

Page 28

TV Installation and Connection Guide

Connecting to a Satellite Receiver or Cable Box With Component
Connectors

Use this hookup if your Satellite Receiver or Cable Box has component (Y, Pb, Pr) jacks.

1.Using a component video cable, connect the Satellite Receiver or Cable Boxes' Y, Pb and
Pr jacks to the Y, Pb and Pr jacks on the TV.

Colors on Component Video connectors:
Y: Green
Pb (also identified as Cb, CB or B-Y): Blue
Pr (also identified as Cr, CR or R-Y): Red

Note: The Y, Pb and Pr jacks on your Satellite Receiver or Cable Box are sometimes labelled
as Y, Cb and Cr, or B-Y and R-Y. If so, connect the cables to the
matching colors.

2.Using an Audio cable, connect the Satellite Receiver or Cable Boxes' Audio OUT jacks to
the TV's Audio in jacks.

Note: The Y, Pb and Pr jacks do not provide audio, so audio cables must
be connected to provide sound.

Note: The YPbPr connection provides the best quality of video signal
compared to AV (composite) and S-Video connection.

Disconnect all power sources before making any connections.

ANT

DTV

Audio Output

VIDEO-1

VIDEO-2

Component-1

Component-2

Rear of TV

Green

Red

Blue

Component cable with RCA connector

Red

White

Audio cable

Satellite Receiver or Cable Box