Oricom P700 - Manual (Page 25)

25
Call screening
Call screening allows you to hear the caller before you pick up the call by
turning on the answering machine’s speaker during the recording of
incoming messages.
To turn on/off call screening,
1. Press during standby. The 7-segment LCD displays
On
if call
screening is activated or
Of
if call screening is deactivated.
Message alert
Message alert gives you an indication that there is new message(s)
saved in the answering machine by emitting a short beep periodically
when there is new message(s).
To turn on/off message alert,
1. Press during standby. The 7-segment LCD displays
On
if message
alert is activated or
Of
if message alert is deactivated.
Volume adjustment
You can adjust the volume of call screening and message playback.
To adjust the volume, during standby or call screening or message
playback,
1. Press to increase the volume. Press to decrease the
volume.
Ring delay
You can set the number of times the answering machine would ring
before it answers the call. This only applies when the answering machine
is turned on.
The time saver option is useful when using the remote access feature.
When the time saver option is selected, the answering machine will ring
four times if no new messages are recorded or two times if there is a new
message.
To review the current ring delay setting,
NOTE: Memo will also be deleted by deleting all function if it is already
played back. (See the Section: Deleting All ICMs function)
VOL+ VOL-