Oricom P700 - Manual (Page 22)

22
When memory is full, no incoming message will be recorded. The
answering machine will announce the following outgoing message (OGM)
and release the line.
“Hello, we’re sorry your call cannot be taken at the moment, and you
cannot leave a message, so please call later.”
Recording an OGM
The maximum recording time is 40 seconds. You do not need to delete
your previously recorded OGM to record a new one. Once you record a
new OGM, the old one will be overwritten.
To record an OGM:
1. Press for 2 seconds. The answering machine emits a short
beep for recording.
2. Speak into the microphone of the base station after the beep.
3. Press to stop recording or recording will stop after 40 seconds.
The recorded message will play back automatically for review.
Listening to the current OGM
1. Press .
2. Press to stop OGM playback or it will stop when the OGM is
finished.
Deleting an OGM
1. Press while listening to the OGM. This will restore the default
OGM.
Incoming messages (ICM)
The answering machine can record up to 60 messages. A message can
be up to 2 minutes long.
When a new message is saved, the 7-segment LCD will blink the number
of new messages being stored in the answering machine. During ICM
NOTE: If you are not satisfied with the recorded OGM, repeat from
step 1 to step 3 and the old OGM will be overwritten. You can also
restore the default OGM by deleting the OGM you have recorded.
NOTE: The default OGM cannot be deleted.
OGM
OGM