Olympus P-11 - Manual (Page 8)

8
Safety precautions
ENGLISH
Preparation
Printing
For Your Reference
Introduction
CAUTION
J Do not put the printer on an unstable surface
Do not put the printer on an unstable surface such as a shaky table.
Injury may result from the printer being dropped or falling. This
could also damage the printer or cause the printer to malfunction.
J Do not touch the non-user-serviceable parts inside the printer
Doing so may cause injury or burns. This applies especially to
children and those unfamiliar with the printer.
J Do not move the printer when the power cord is taut
Moving the printer when the power cord is taut may damage the
cord.
Using the printer when damaged may cause fire or electric shock.
When moving the printer, unplug and bundle the power cord.
J Do not unplug the printer by jerking or pulling on the power
cord
To unplug the power cord, hold it by the plug. Pulling on the cord
may damage it, possibly resulting in fire or electric shock.
J Unplug the printer for servicing
Always unplug the printer before servicing or performing
maintenance.
J Unplug the printer if it will not be used for an extended period
of time
Unplug the printer if it will not be used for an extended period of
time, such as while you are away on a long trip.
Otherwise, deteriorated insulation or current leakage may cause fire
or electric shock.
p11_e_000_bookfile.book Page 8 Monday, July 25, 2005 10:47 AM