Olympus P-11 User Manual
Page 14
Preparation
Printing
Introduction
ENGLISH
For Your Reference
14
Preparation
Connecting the power supply and turning on/off the printer
1
Remove the left side cover of the printer.
2
Connect the power cord to the AC adapter and insert the power
plug into an outlet.
3
Connect the DC plug to the DC-IN terminal of the printer and set
the cord in the guide on the printer as shown in the picture.
Be sure to pass the cord through the guide.
Power plug
DC plug
Cord
Guide
p11_e_000_bookfile.book Page 14 Monday, July 25, 2005 10:47 AM