Olympus P-11 - Manual (Page 29)

29
Printing pictures from a computer
Preparation
Printing
For Your Reference
Introduction
ENGLISH
Printer settings
You can set the paper size, copy count, and color adjustment settings
on the [Paper] and [Graphics] tabs of the Printing Preferences window.
The following items can be selected on the [Paper] tab.
The following items can be selected on the [Graphics] tab.
Item Description
Paper Size Select 4 Ч 6 (100 Ч 148 mm) or 3.5" Ч 5" (89 Ч 127 mm).
Copy Count Select up to 50 copies.
Orientation Select the print orientation.
Print Area Select [Not Edged] or [Edged].
Separation Select 2, 4, 9, or 16 separation printing. This setting is
only available when [Edged] is selected.
Sharpness Select [Soft], [Normal] or [Hard].
Over Coat This setting should normally be left unchanged.
Item Description
Tone Adjust the red, green and blue tones from -5 to +5.
Saturation Set the saturation of the whole image from 0 to +10.
Brightness Set the brightness of the whole image from -5 to +5.
Contrast Set the contrast from -5 to +5.
[Paper] tab [Graphics] tab
p11_e_000_bookfile.book Page 29 Monday, July 25, 2005 10:47 AM