Onkyo MB-S1 - Manual (Page 49)

48
Setting the PC
Notes
• When “Unknown device” appears under “Universal Serial Bus
Controller”, unplug the USB cable and plug it again for the MB-
S1 to be recognized.
• In Windows Me, green “? ” mark may appear next to “USB
Compatible Device” and “***” in the Device Manager tab, but
this will not effect the operation and function of the MB-S1.
• It may take about 15 seconds to recognize the UE-205 when
you connect the USB cable or the PC starts up. During this
recognition process, do not start any application and do not
perform any operations on the PC. And do not unplug the USB
cable while any applications runs on the PC.
Confirming the installation of the device driver
1. Click Start, point to Settings, and
double-click Control Panel.
2. Double-click the System icon.
3. Click Hardware. (Windows 2000 only)
4. Click the Device Manager tab.
5. Confirm the installed device drivers are
displayed in the dialog box.
• Find “USB Audio Device” under the “***”
• Find “USB Root Hub”, “*USB Compatible Device*,” “***,”
and “UE205DRV Device.”
When using Windows 98SE/Me
Confirm these device drivers are installed.