Olympus Stylus Tough-8010 EN - Manual (Page 31)

31 EN
2
Use HI to select the setting
option, and press the A button to
set.
Option Description
WB AUTO
The camera automatically adjusts
the white balance according to the
shooting scene.
5
For shooting outdoors under a
clear sky.
3
For shooting outdoors under a
cloudy sky.
1
For shooting under tungsten
lighting.
w
For shooting under daylight
fl uorescent lighting (household
lighting, etc.)
x
For shooting under neutral
fl uorescent lighting (desk lamps,
etc.)
y
For shooting under white
fl uorescent lighting (offi ces, etc.)
O *
For underwater shooting (this
setting is available when the
s
mode is set to [k WIDE1]).
P *
For underwater shooting (this
setting is available when the
s
mode is set to [l WIDE2]).
Q *
For underwater shooting (this
setting is available when the
s
mode is set to [H MACRO]).
* STYLUS TOUGH-8010/ μ TOUGH-8010 and
STYLUS TOUGH-6020/ μ TOUGH-6020 only
Selecting the ISO sensitivity
Abbreviation for the International
Organization for Standardization. ISO
standards specify the sensitivity for digital
cameras and fi lm, thus codes such as “ISO
100” are used to represent sensitivity.
In the ISO setting, although smaller values
result in less sensitivity, sharp images can
be taken under fully lit conditions. Larger
values result in higher sensitivity, and
images can be taken at fast shutter speeds
even under low light conditions. However,
high sensitivity introduces noise into the
resulting picture, which may give it a grainy
appearance.
1
Select the ISO setting option in the
shooting function menu.
P P
0.0 0.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
1600
ISO ISO
1600
1/400 F3.9 1/400 F3.9
HIGH
ISO
HIGH
ISO ISO AUTO ISO AUTO
2
Use HI to select the setting
option, and press the A button to
set.
Option Description
ISO AUTO
The camera automatically adjusts
the sensitivity according to the
shooting scene.
HIGH ISO AUTO
The camera uses a higher
sensitivity compared to
[ISO AUTO] to minimize blur
caused by a moving subject or by
camera shake.
Value
The ISO sensitivity is fi xed to the
selected value.