Connecting your components —continued – Onkyo TX-8222 User Manual
Page 19

19
Connecting Your Components
—Continued
With
(Remote Interactive), you can control your
-compatible Onkyo CD player, RI Dock, and so on
with the receiver’s remote controller.
•
To use
, you must make an analog audio
connection between the receiver and each audio 
component.
Notes:
• Push each plug in all the way to make a good
connection.
• Use only dedicated
cables for
connections
(no
cables are supplied with the receiver).
•
jacks should be connected only to Onkyo
components. Connecting them to another 
manufacturer’s component may cause the receiver to 
malfunction.
• Some components may not support all
functions.
See the manuals supplied with your other Onkyo 
components for more information.
The receiver has AC outlets on its rear panel that can be 
used to connect the power cords of other components 
that you intend to use with the receiver. These 
components can then be left turned on so that they turn 
on and off as and when the receiver is turned on and set 
to Standby.
Caution:
• Make sure that the total capacity of the components
that you connect to the AC OUTLETS does not exceed 
the stated capacity (e.g., TOTAL 120 W).
Notes:
• Onkyo components connected via should be
connected directly to a wall outlet, not an AC 
OUTLETS on the receiver.
• The number of AC OUTLETS, socket type, and total
capacity depends on the country in which you 
purchased the receiver.
• Connect the receiver’s power cord to a suitable wall
outlet.
Notes:
•
Before connecting the power cord, connect all of 
your speakers and AV components.
• Turning on the receiver may cause a momentary
power surge that might interfere with other electrical 
equipment on the same circuit. If this is a problem, 
plug the receiver into a different branch circuit.
Onkyo CD player, 
etc.
Receiver
connector
Remote control cable
connector
Onkyo cassette 
deck, etc.
Remote Interactive 
Dock, etc.
connector
Connecting the Power Cords of Other 
Components
Connecting the Power Cord
e.g. TX-8222 
European models
e.g. TX-8522 North 
American model
