Optima Company Optima 45 - 3 - Manual (Page 33)

Optima 45 - 3
33
WARNING: Do not attempt to remove the
glass door when the appliance is hot.
Removing the Glass Door
1. Open both side cover doors.
2. Unlatch the right hand door catches.
3. Swing the door open.
4. Lift the door clear of the bottom hinge
and drop out of the top hinge.
Replacing the Glass Door
Reverse the above procedure.
GLASS DOOR REMOVAL
WARNING:
• Do not attempt to remove the glass panel assemblies when the appliance is hot.
• Do not strike or abuse glass panel (s).
• Do not operate with glass panel (s) broken or cracked.
• Broken or cracked glass panel assemblies must be replaced only with those supplied by
Archgard Industries.
• Do not use substitute materials or assemblies.
• Replacement of the glass should be carried out by a licensed or qualified service person.
In the event that your glass cracks or breaks, Archgard recommends that a new door assembly be
ordered to replace the original door.
• Remove door as per the instructions above.
• Replace with new door assemblies.
NOTE: the NEW door will omit some odor when the appliance is re-lit and the odor will dissipate
after the gasket material within the door has cured.
IF YOUR GLASS BREAKS
To open the door
release the two
securing catches