Onkyo HT-R590 User Manual
Page 30
30
En
Note
*1
These listening modes cannot be selected during USB or iPod playback.
*2
When the input source contains the encoded front high channel, front high speakers output the sound.
*3
If there are no surround back speakers, Dolby Pro Logic II is used.
*4
Surround back speakers are not supported.
*5
Front high speakers are not supported.
*6
For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system.
*7
AV receiver can input the DSD signal from HDMI IN. Setting the output setting on the player side to PCM might obtain a better
sound according to the player. In that case, set the output setting on the player side to PCM.
*8
If there are no surround back speakers, DTS is used.
• The listening modes cannot be selected with some source formats.
Dolby Digital
In this mode, audio from the input source is output without surround-sound
processing. The speaker configuration (presence of speakers), crossover
frequency, speaker distance, A/V Sync and much of the processing set via
Home menu are enabled. See “Advanced Setup” for more details
(
page 34).
Dolby Digital Plus
*6
*2
Dolby TrueHD
*2
DTS
DTS-HD High
Resolution Audio
*2
DTS-HD Master
Audio
*2
DTS Express
DSD
*7
DTS 96/24
This mode is for use with DTS 96/24 sources. This is high-resolution DTS
with a 96 kHz sampling rate and 24-bit resolution, providing superior
fidelity. Use it with DVDs that bear the DTS 96/24 logo.
DTS-ES Discrete
*8
This mode is for use with DTS-ES Discrete soundtracks, which use a
discrete surround back channel for true 6.1/7.1-channel playback. The seven
totally separate audio channels provide better spatial imaging and 360-
degree sound localization, perfect for sounds that pan across the surround
channels. Use it with DVDs that bear the DTS-ES logo, especially those with
a DTS-ES Discrete soundtrack.
*5
DTS-ES Matrix
*8
This mode is for use with DTS-ES Matrix soundtracks, which use a matrix-
encoded back-channel for 6.1/7.1-channel playback. Use it with DVDs that
bear the DTS-ES logo, especially those with a DTS-ES Matrix soundtrack.
Neo:6
This mode expands any 2-channel source for up to 7.1-channel playback. It
uses seven full-bandwidth channels of matrix decoding for matrix-encoded
material, providing a very natural and seamless surround sound experience
that fully envelops the listener.
• Neo:6 Cinema
Use this mode with any stereo movie (e.g., TV, DVD, VHS).
• Neo:6 Music
Use this mode with any stereo music source (e.g., CD, radio, cassette, TV,
VHS, DVD).
*5
This mode uses Neo:6 to expand 5.1-channel sources for 6.1/7.1-channel
playback.
*5
Listening Mode
Description
Input
Source
Speaker
Layout
D o l b y
D
D o l b y
D
+
D o l b y
T r u e H D
D T S
D T S
–
H D
H R
D T S
–
H D
M S T R
D T S
E x p r e s s
D S D
D T S
9 6 / 2 4
E S
D i s c r e t e
E S
M a t r i x
N e o
6
:
N e o
6
:
N e o
6
:
N e o
6
C i n e m a
:
N e o
6
M u s i c
: