Continuous scan - trigger delays, Continuous scan – Opticon LH2 User Manual
Page 84
Continuous Scan
84
Continuous Scan
85
Command Name: Continuous Scan - Trigger Delays
Usage:
Sets the delay time for continuous scan.
Description:
This command allows you to program the delay time between scans
while in continuous scan mode.
Default:
Delay is set to 0 seconds
Programming Code:
Serial Command:
3 Seconds
P%a2#3000<┘
Options:
Programming Code:
Serial Command:
1 Second
P%a2#1000<┘
0 Second (Default)
P%a2#0<┘