Olympus MAUSB-10 - Manual (Page 35)

35
Operating the MAUSB-10
The operating procedure for the MAUSB-10 under Mac OS is described below.
1 Connecting to the computer ࡗOperation>
After installing the device driver, connect the MAUSB-10’s connector to the USB port on your computer. (You
can plug in the USB connector while the computer is in use.)
[Notes]
• Be sure to connect the MAUSB-10 to your computer AFTER installing the device driver.
• Make sure the connector is fully inserted.
• When inserting the connector, make sure it is oriented correctly (refer to the pictures below). Inserting the
connector incorrectly may damage the connector and/or the computer’s USB port.
* In the example, the MAUSB-10 is connected to the
USB port of an iMac computer. The MAUSB-10 is
connected to USB port 1 and the keyboard is
connected to USB port 2.