Ovation Software Label Printer - Manual (Page 37)

Maintenance
Ovation

2 29
3.1 Cleaning the Printhead
Warning: Turn ‘off’ the printer and unplug the unit from
the outlet before cleaning the printhead.
1. Turn ‘off’ the printer and open the cover.
2. Push the printhead latch back toward the back of the printer and
raise the printhead carrier assembly.
3. Using a cotton swab dipped in isopropyl alcohol, rub the cotton
swab along the printhead.
Figure 3-1 Cleaning the Printhead
Note: The printhead should be cleaned every time a new roll of media
is installed.