Ovation Software Label Printer - Manual (Page 36)

Ovation

2 28
♦ Maintenance
3.0 Introduction
This chapter covers the cleaning, adjusting, and some troubleshooting
tips involved with your printer. In addition, the following table
provides a recommended cleaning schedule for the various parts of
your printer.
Area Method Interval
Printhead Turn off the printer before cleaning
the printhead. Use solvent* on a
cotton swab to clean the printhead
from end to end. After every roll of
media.
Platen Roller Turn the power off. Rotate the
platen roller and clean it thoroughly
with solvent* and a cotton swab. After every roll of
media.
Peel-Off
Roller Rotate the peel-off roller and clean it
thoroughly with solvent* and a
cotton swab. After every roll of
media.
Media Path Solvent* After every roll of
media.
Peel/Tear Bar Solvent* As needed
Media Sensor Air blow Monthly
Exterior Mild detergent or desktop cleaner. As needed
Interior Brush or vacuum cleaner As needed.
* Recommend using a solvent that contains isopropyl alcohol.