Olympus DM 620 - Manual (Page 33)

2
33
EN
R
e
cording
Recording
Settings relating to Recording
[Mic Select]
(
☞ P.53)
Select whether or not the
built-in center microphone is
to be turned On or Off.
[Mic Sense]
(
☞ P.53)
Sets the recording sensitivity.
[Rec Mode]
(
☞ P.54)
Sets the recording rate for
each recording format.
[Rec Level]
(
☞ P.54)
You can configure whether
to adjust the recording level
automatically or to adjust it
manually.
[Zoom Mic]
(
☞ P.55)
Sets the directivity of the
builtin stereo microphone.
[Low Cut Filter]
(
☞ P.55)
This function can reduce
noise from air conditioners,
projectors and other similar
noises.
[VCVA]
(
☞ P.55)
Sets the threshold level for
the Variable Control Voice
Actuator (VCVA).
[V-Sync. Rec]
(
☞ P.56)
Sets the start level for voice
sync recording.
[Timer Rec]
(
☞ P.70)
Sets timer recording.
[Rec Scene]
(
☞ P.58)
Sets the recording settings
which matches the recording
condition or environment.
[Rec Monitor]
(
☞ P.59)
Select whether or not to
output the recording monitor
sound from the EAR jack.
• [
•] will appear on the display.
• Recording will stop, and the file that was
just recorded will be played back.
Pause
While the recorder is during
recording mode, press the REC (
s)
button.
• [
≠] will appear on the display.
• The recorder will time out after 120
minutes when left in [Rec Pause].
Resume Recording:
Press the REC (
s) button again.
• Recording will resume at the point of
interruption.
To quickly check on the recorded contents
While the recorder is during
recording mode, press the
`OK
button.