Onkyo AV RECEIVER TX-NR1009 - Manual (Page 22)

22
En
Turning On & Basic Operations
Turning On/Off the AV Receiver
Tip
• For details on power management settings, see “Auto Standby” (
➔
page 61).
Turning On
1 (European and Asian models)
Set
POWER to the ON position ( ) on the front panel.
The AV receiver enters standby mode.
2 Press ON/STANDBY on the front panel.
or
Press RECEIVER followed by RECEIVER on the remote controller.
The AV receiver comes on, the display lights.
Turning Off
1 Press ON/STANDBY on the front panel.
or
Press RECEIVER followed by RECEIVER on the remote controller.
The AV receiver will enter standby mode. To prevent any loud surprises when you turn on the AV receiver, always
turn down the volume before you turn it off.
(European and Asian models)
To completely shut down the AV receiver, set POWER to the OFF position ( ).
ON/STANDBY ON/STANDBY
POWER
(North American models) (European and Asian models)
RECEIVER
RECEIVER