Optoma HD3000 - Manual (Page 26)

HD3000 User’s Guide
Professional Video Scaler and Color Management System
HD3000 User’s Guide 6
Initial Adjustments
Auto Calibration
The HD3000 features an “Auto Calibration” feature. This will automatically optimize and
adjust the video image.
1. Activate the OSD by pressing the “Menu” button.
. Use “h” or “i” arrow keys to select SETUP category and then press “Enter” or “g” key to
enter this adjustment category.
3. Use “h” or “i” arrow keys to select the desired adjustment item (as shown):
4. Press “Enter” or “g” to enter this item. The Menu disappears and a small bar appears as
shown below:
Auto Calibration Off On
5. Use “f” or “g” arrow keys to turn on or off the auto calibration.
6. Once the “Auto Calibration” is activated, the HD3000 calibrates and fine-tunes the image
for optimal performance.