Tetra 5060 controls, Top housing controls, Rear plate controls – Olympus 5060 User Manual
Page 7
![background image](/manuals/205330/7/background.png)
8
Tetra 5060 Controls
Top Housing Controls
Shutter-Release Button: Presses the camera’s shutter-release button. Press the button half
way for the camera to auto-focus, press completely down when you’re ready to take a
picture (Refer fig. 7).
Zoom Lever: Zooms the camera’s lens to telephoto or wide-angle (Refer fig. 7).
Mode Dial: Accesses the camera’s Mode Dial (Refer fig. 8).
Flower button: Accesses the camera’s AF Macro Mode (Refer fig. 9)
Rear Plate Controls
ROC button:Activates ROC and toggles between Digital TTL and Manual strobe control
(Refer fig. 10).
+ button: Increases strobe power (Refer fig. 10).
- button: Decreases strobe power (Refer fig. 10).
Control Dial:Turns camera’s control dial (Refer fig 12).
AEL: Access the camera’s Erase and AEL features (Refer fig 12).
Monitor button: Turns camera’s LCD on and off. Press once to turn screen information
off; Press twice to turn LCD off (Refer fig 12).
Menu button: Access the camera’s menu and OK button (Refer fig 12).
Card buttons: Accesses camera’s Card button (Refer fig 12).
Exp. Comp.: Used to change aperture in Manual shooting Mode by pressing and holding
and rotating the Control Dial (Refer fig 11).
Flash button: Access the camera’s flash control (Refer fig. 11).
Quick View button: Displays the last photo taken (Refer fig 12).