Olympus 5060 - Manual (Page 2)

Welcome
Congratulations on your purchase of a Tetra 5060 digital still housing.
Please inspect the packaging of your product to verify that there was no damage during
shipping.
If you are not familiar with your camera’s features, please take time to become familiar
with the camera before you proceed in this manual. This manual assumes you have a
working knowledge of your camera and will only cover operational procedures relative
to the Tetra housing.
Periodically refer to the website for instruction revisions.
http://www.uwimaging.com
Caution - Caution - Caution - Caution - Caution
We hope you have a wonderful underwater experience with Light & Motion equipment.
To increase your enjoyment and the life span of your new gear please take an extra
minute to review these general recommendations.
• Check the operation of all your equipment several weeks prior to your trip. If
maintenance or repair is necessary, then time is available for both shipping and repair
scheduling.
• Never transport or ship the housing with the camera inside. This may damage your
camera.
• Never leave your housing in the rinse tank, it may be damaged by other equipment.
• When removing the camera from the housing after a dive, do so in a dry controlled
environment away from other SCUBA related equipment. This prevents water from
other equipment or water from another diver accidentally entering the housing.
• If a product is flooded, immediately rinse it with fresh water. Most parts will be
salvageable if not corroded by salt water.
3