Onkyo Remote Interactive Dock for iPod/iPhone DS-A4 - Manual (Page 9)

9
Using the RI Dock
Set the OSD (onscreen display) mode before
you start using the RI Dock.
1. Plug in the AC adapter.
2. Turn on your TV and amp, and select the
appropriate inputs on your TV and amp.
3. Insert your
iPod/iPhone into the
RI Dock.
4. Select the video output mode depending
on the video connection.
While pressing the remote controller’s
[SETUP] button, press the Up [
] button for
the component video connection, press the
[
] button for the composite (default) con-
nection.
5. Use the remote controller’s
[MODE] button to set the
OSD mode.
On: Playlists (artists, albums, songs, and so
on) are displayed on your TV, and you
can navigate and select your music or
video while looking at your TV. While
this mode is selected, your iPod/iPhone
displays the Onkyo logo.
Off: Nothing is displayed on your TV and
you navigate and select your contents
by using your iPod/iPhone model’s dis-
play.
To control your iPod/iPhone without the OSD,
set the OSD mode to Off, and use the remote
controller as explained on page 6.
When the OSD mode is set to On and your
iPod/iPhone is inserted in the RI Dock, you can
navigate and select your music or video on
your TV.
■ Playing Songs
1. Press the remote controller’s [MENU] but-
ton to select the Music mode.
Setting the OSD Mode
iPod/iPhone
Controlling Your iPod/iPhone without
the OSD
Controlling Your iPod/iPhone with
the OSD
Music Mode
Notes:
• To prevent dock connector damage,
don’t twist your iPod/iPhone when insert-
ing or removing it, and be careful not to
knock over the RI Dock while your
iPod/iPhone is inserted.
• Don’t use the RI Dock with any other
iPod/iPhone accessories, such as FM
transmitters and microphones, because
they may cause a malfunction.
• You can’t change the OSD mode while
watching an iPod/iPhone slideshow or
video.
MENU
SELECT
/