Changing volume lock – One for All URC-3605 User Manual
Page 17
CHANGING VOLUME LOCK
The One For All DVD Expert Universal Remote Control
is set at the factory for independent volume control of
each selected device.
However, you may change the Volume Lock setting to
Global Volume Lock so that a device’s volume will be
locked to one mode (e.g., to control TV volume in all
other modes).After that, if desired, you can perform
Individual Volume Unlock on a selected device to set its
volume control for independent operation.
Locking Volume Control To One Mode
(Global Volume Lock)
1.
Press and hold
SET
until the
LED
(red light)
blinks twice, then release
SET
.
2.
Enter
9
-
9
-
3
and then press any
mode key once (e.g.,
TV
). The
LED
will
blink twice.
3.
Now, when you press
VOL
▲
,
VOL
▼
, or
MUTE
, the volume of the selected device
(e.g.,
TV
) will be controlled, regardless of
the mode you have selected.
Unlocking Volume Control For A Single Device
(Individual Volume Unlock)
1.
After performing Global Volume Lock (on
page 16), press a desired mode key where
you want volume to be unlocked (e.g.,
AUX
) and controlled within its own mode.
2.
Press and and hold
SET
until the
LED
(red
light) blinks twice, then release
SET
.
3.
Enter
9
-
9
-
3
and then press
VOL
▼
once.
The
LED
will blink four times.
4.
If desired, repeat steps 1 through 3
(of this section) for each device that you
want volume to be unlocked.
5.
Now, after you select a device that has
volume unlocked (e.g.,
AUX
), pressing
VOL
▲
,
VOL
▼
, or
MUTE
will control the
device’s volume only in its own mode.
continued on next page...
17
IMPVE4P manual 1.0 4/11/03 4:34 PM Page 17