One for All URC-3605 - Manual (Page 14)

USING KEYMOVER
Programming Keymover (continued)
Upon completion of the above procedure, you can now
use your One For All DVD Expert Universal Remote
Control to control the TV’s volume and mute in the
DVD mode, as well as in the TV mode.
Restoring Keymoved Keys to Default Settings
Restoring A Single Keymoved Key
1. Press a device key that has a keymoved key.
2. Press and hold SET until the LED (red light)
blinks twice, then release SET .
3. Enter 9 - 9 - 4 . The LED will blink twice.
4. Press the destination key twice (where the
keymoved key is stored). The
LED will
blink twice.
Restoring All Keymoved Keys In A Single Mode
1. Press and hold SET until the LED (red light)
blinks twice, then release SET .
2. Enter 9 - 9 - 4 . The LED will blink twice.
3. Press the destination mode twice (where
keymoved keys are stored). The
LED will
blink twice.
RE-ASSIGNING DEVICE KEYS
The One For All DVD Expert Universal Remote Control
can be set to control a second TV, PVR,VCR, DVD player,
or other device. For example, to control a TV, a cable box,
and two DVD players, re-assign the unused
AUX key to
operate the second DVD player as follows:
1. On the remote control, press and hold SET
until the LED (red light) blinks twice, then
release SET .
2. Enter 9 - 9 - 2 . The LED will blink twice.
14
IMPVE4P manual 1.0 4/11/03 4:34 PM Page 14