Onkyo TX-SA705 - Manual (Page 56)

56
First Time Setup—Continued
Notes:
• When the automatic speaker setup is complete, the
Equalizer Settings (page 82) will be set to “Audyssey.”
• You can cancel the automatic speaker setup at any
point in this procedure simply by disconnecting the
setup microphone.
7 After the 3rd to the 7th measure-
ment, the following screen
appears.
Use the Up and Down [ ]/[ ]
buttons to select an option, and
then press [ENTER].
Next: Select this if you want to mea-
sure another listening posi-
tion.
After the 8th measurement
has been taken, the procedure
automatically proceeds to
step 8.
finish (Calculate): Select this if you
don’t want to measure any
more listening positions and
are ready to calculate the
results, then go to step 8.
8 When the measurements are
complete, the following screen
appears.
9 When the calculations are com-
plete, the following screen
appears.
ENTER
ENTER
Auto Speaker Setup AUDYSSEY
Please select “Next” , when measuring
next position, and select “finish” ,
when ending.
Next
finish (Calculate)
Auto Speaker Setup AUDYSSEY
Calculating...
Auto Speaker Setup AUDYSSEY
Save
Review SP Config
Review SP Distance
Review SP Level
Cancel
Use the Up and Down [ ]/[ ]
buttons to select an option, and
then press [ENTER].
The options are:
Save:
Save the calculated settings and exit
the automatic speaker setup.
Review SP Config:
Review the speaker configuration
settings (see “Reviewing the
Results” on page 58).
Review SP Distance:
Review the speaker distance set-
tings (see “Reviewing the Results”
on page 58).
Review SP Level:
Review the speaker level settings (see
“Reviewing the Results” on page 58).
Cancel:
Cancel the automatic speaker setup.
10 If you selected “Save,” the results are
saved, and the following screen
appears.
11 Disconnect the speaker setup
microphone.
ENTER
ENTER
Auto Speaker Setup AUDYSSEY
Saving...
Auto Speaker Setup AUDYSSEY
Please unplug microphone.