Orion Car Audio Coaxial Speaker XTR522 - Manual (Page 3)

2 © 2008 directed electronics—all rights reserved
Model Number: ____________________________
Serial Number: ____________________________
Date of Purchase: ____________________________
WHAT’S IN THE BOX
Included in this box are all the necessary mounting hardware and cables for your basic
installation. Listed below is a detailed list of the components included in this system
package.
Quantity Description
1 Owner's Manual
1 Mounting template
2 XTR Coaxial Speakers
2 Grilles (except for 4", 4"x6", 5"x7")
Mounting Screws
TOOLS OF THE TRADE
Listed are the majority of the tools required to perform the installation. Having
the proper tools will make the installation much easier. Some of these tools are
required.
• marking pen • needle nose pliers
• wire crimpers • electric drill
• volt-ohm meter (opt.) • wire strippers
• 1/8" drill bit • wire cutters
• assorted tin snips • hole saw arbor
• Phillips screwdriver
• 41/8" (105mm) hole saw (4"Coaxial installation)
• 43/4" (120mm) hole saw (5.25"Coaxial installation)
• 51/8" (130mm) hole saw (6" & 6.5" Coaxial installation)
INSTALLATION
The performance of the XTR coaxial speakers is directly proportional to the quality of
installation. Care taken during the installation process will be rewarded with years of
satisfying performance. If you are unsure about your installation capabilities, please
refer to your local Authorized Orion Dealer for technical assistance. Orion dealers are
trained professionals dedicated to obtaining the maximum performance out of your
Orion system. If you decide to install this speaker system yourself, please read the
entire installation section before starting your installation.