Music optimizer – Onkyo 7.2-Channel Network Audio/Video Receiver HT-RC360 User Manual
Page 56

56
En
Late Night
■
Late Night
For Dolby Digital and Dolby Digital Plus sources, the 
options are:
`
Off
`
Low:
Small reduction in dynamic range.
`
High:
Large reduction in dynamic range.
For Dolby TrueHD sources, the options are:
`
Auto:
The Late Night function is set to “On” or “Off” 
automatically.
`
Off
`
On
Turn this setting on to reduce the dynamic range of Dolby 
Digital material so that you can still hear quiet parts even 
when listening at low volume levels—ideal for watching 
movies late at night when you don’t want to disturb 
anyone.
Note
• The effect of the Late Night function depends on the material
that you are playing and the intention of the original sound 
designer, and with some material there will be little or no effect 
when you select the different options.
• The Late Night function can be used only when the input source
is Dolby Digital, Dolby Digital Plus, or Dolby TrueHD.
• The Late Night function is set to “Off” when the AV receiver is
set to standby. For Dolby TrueHD sources, it will be set to 
“Auto”.
Music Optimizer
■
Music Optimizer
`
Off
`
On
Turn this setting on to enhance the sound quality of 
compressed music files. Use it with music files that use 
“lossy” compression, such as MP3.
Tip
• (North American models) Alternatively, you can use the AV
receiver’s MUSIC OPTIMIZER.
Note
• The Music Optimizer function only works with PCM digital
audio input signals with a sampling rate below 48 kHz and 
analog audio input signals. The Music Optimizer is disabled 
when the Direct or Pure Audio (Chinese models) listening mode 
is selected.
• The setting is stored individually for each input selector.
• The M.Opt indicator will light (
page 9).
• (North American models) The MUSIC OPTIMIZER indicator
lights on the front panel (
CinemaFILTER
■
Cinema Filter
`
Off
`
On
Turn this setting on to soften overly bright movie 
soundtracks, which are typically mixed for reproduction in 
a movie theater.
CinemaFILTER can be used with the following listening 
modes: Dolby Digital, Dolby Digital EX, Dolby Digital 
Plus, Dolby TrueHD, Dolby Pro Logic IIx Movie, Dolby 
Pro Logic II Movie, Dolby Pro Logic IIz Height, 
Multichannel, DTS, DTS-ES, DTS Neo:6 Cinema, DTS 
96/24, Neo:6, DTS-HD High Resolution Audio, DTS-HD 
Master Audio and DTS Express.
Note
• The CinemaFILTER may not work when used with certain input
sources.
