Optoma Home Theatre Projector - Manual (Page 30)

User Controls
28

There are four main modules in the OSD: IMAGE,
DISPLAY, SYSTEM, and SETUP:
IMAGE enables a powerful interface to tune the picture to the best
quality possible
DISPLAY provides the ability to set the different scaling formats, both
input and output
SYSTEM contains other system oriented functions, such as language,
changing output resolution, and more
SETUP confi gures video inputs

The Projector has multilingual On-screen Display menus
that allow you to make image adjustments and change a
variety of settings.
How to operate
1. To open the OSD menu, press “Menu” on the Remote Control
or Control Panel.
2 When OSD is displayed, use keys to select any item in the
main menu. While making a selection on a particular page, press
or “Select (Enter)” key to enter sub menu.
3. Use keys to select the desired item and adjust the settings by
key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press “Select (Enter)” to confi rm, and the screen will return to the
main menu.
6. To exit, press “Menu” again. The OSD menu will close and the
projector will automatically save the new settings.
On-screen Display Menus
Main Menu
Sub Menu
Setting