Onkyo DR-815 - Manual (Page 20)

20
Connecting Your TV
Connect the DVD receiver to the TV directly. If you con-
nect the DVD receiver to a VCR, TV/VCR combination,
or video selector, the playback picture may be distorted
as DVD videos are copy protected.
Using Video
Use the supplied video cable (RCA) and connect the
VIDEO OUT to the VIDEO input on your TV.
Using S Video
If your TV (or other equipment) has an S Video input,
you can use this instead of the standard (composite) out-
put for a better quality picture.
• Use an S Video cable (not supplied) to connect the S
VIDEO OUTPUT to an S Video input on your TV (or
monitor or AV receiver).
Line up the small triangle above the jack with the same
mark on the plug before plugging in.
Using SCART
If your TV has a SCART-type AV input, you can use a
SCART cable to connect the DVD receiver to your TV.
• Use a SCART cable (not supplied) to connect the
AVCONNECTOR to an AV input on your TV.
This connector can output composite video, S-Video, or
RGB video. The default setting is composite, which
should work with all TVs. Consult the manual that came
with your TV to see if you can use one of the higher
quality settings. See page 68 for how to change the video
output.
TV
Video cable
(Supplied)
TV
S-Video cable
(Not supplied)
TV SCART