Olympus EYETREK FMD-150W-US - Manual (Page 30)

E-30
Symptom Possible Cause Solution Ref. Page
Video is not Connections are incorrect. Connect the video cables P.11 ~ 13
displayed. properly.
A video signal is not input or Turn on the power of the video P. 17
the power is not turned on. component and play back video.
Video is hard to The display unit is being Adjust the position with P. 15 ~ 16
view. worn improperly. the nose pad.
Video settings (CONTRAST, Adjust video settings with the P. 20
TINT) are adjusted improperly. jog dial. P. 23 ~ 25
Video disappears About 2-1/2 hours have Rest your eyes. P. 4
suddenly. elapsed since the POWER Set the POWER switch to ON P. 20
switch was set to ON. when you want to use again.
(Power turns off automatically.)
The battery pack has run Charge it or use an AC adapter. P. 11
out. P. 14
A black, white, red, The LCD screens are manufactured to precise specifications, P. 2
green or blue dot is but colored dots may be observed.
observed on the This is not a malfunction.
screen.
A striped pattern is This is due to the built-in optical filter which smoothes the P. 2
observed with the image and is not a malfunction.
video image.
Audio is not heard. The volume is set to Adjust the VOLume control. P. 19
minimum.
The AV cable is not Connect the AV cable. P. 11
connected.
The battery power The battery pack is Replace the battery pack with P. 14
runs out very quickly. approaching the end of its a new one.
life.
You forgot your Re-register the password. P. 28
password.
You want to change Perform a reset. P. 17
the language to P. 27
display.
TROUBLESHOOTING
The warranty period of this unit is one year from the date of purchase. Within this period, our company
will repair this unit free of charge. However, this warranty may not cover damage caused by user
mishandling, even if it occurs during the warranty period. If repairs are required after the warranty
period has ended, please contact either the supplier from which you purchased this unit or our
company.
REPAIR SERVICE