Troubleshooting – SINBO SBM 4712 User Manual
Page 28

- 27 -
TROUBLESHOOTING
PROBLEM: Smoke from ventilation hole when baking
CAUSE: Some ingredients adhere to the heat element or nearby, for the first use, oil
remained on the surface of heat element
SOLUTION: Unplug the bread maker and clean the heat element, but be careful not to
burn you, during the first use, dry operating and open the lid.
PROBLEM: Bread bottom crust is too thick
CAUSE: Keep bread warm and leave bread in the bread pan for a long time so that water
is losing too much
SOLUTION: Take bread out soon without keeping it warm
PROBLEM: It is very difficult to take bread out
CAUSE: Kneader adheres tightly to the shaft in bread pan
SOLUTION: After taking bread out, put hot water into bread pan and immerge kneader
for 10 minutes, then take it out and clean.
PROBLEM: Stir ingredients not evenly and bake badly
CAUSE 1. Selected program menu is improper
SOLUTION 1. Select the proper program menu
CAUSE 2. After operating, open cover several times and bread is dry, no brown crust
color
SOLUTION 2. Don’t open cover at the last rise
CAUSE 3. Stir resistance is too large so that kneader almost can’t rotate and stir adequately
SOLUTION 3. Check kneader hole, then take bread pan out and operate without load, if
not normal, contact with the authorized service facility.
PROBLEM: Display “H:HH” after pressing “start/stop” button
CAUSE: The temperature in bread maker is too high to make bread.
SOLUTION: Press “start/stop” button and unplug bread maker, then take bread pan out
and open cover until the bread maker cools down
PROBLEM: Hear the motor noises but dough isn’t stirred
CAUSE: Bread pan is fixed improperly or dough is too large to be stirred
SOLUTION: Check whether bread pan is fixed properly and dough is made according to
recipe and the ingredients is weighed accurately
PROBLEM: Bread size is so large as to push cover
CAUSE: Yeast is too much or flour is excessive or water is too much or environment
temperature is too high
SOLUTION: Check the above factors, reduce properly the amount according to the true
reasons