Olympus CAMEDIA C-40 ZOOM - Manual (Page 39)

39
All-frame print reserve
Allows you to store print data for all the pictures on the card, as well as
allowing you to choose how many prints you want.
Trimming print reserve
You can print an enlarged part of a recorded picture.
Resetting print reserve
Allows you to reset all Print Reserve settings for pictures stored on a card.
1 Play back a still picture. Press to display the top menu.
2 Select PRINT ORDER in the top menu to display the PRINT ORDER
SETTING screen by pressing
ñ
. If Print Reserve data is NOT stored
on the card, the PRINT ORDER SETTING screen does not appear.
3 Press Ññ to select RESET, then press .
4 Press É to return to the top menu. Press to exit from the top
menu.
● To remove the selected image only, select KEEP, then set the number of
prints in single- frame print reserve to 0.
● To perform print reserve for additional pictures, select KEEP. Print reserve
can be added to the print reserve data already stored on the card.
● This camera cannot be directly connected to printers.
● If a card contains DPOF reservations set by another device, entering
reservations using this camera may overwrite the previous reservations. Be
sure to use this camera for reservations.
1 C-40ZBasic-E1 01.10.11 9:39 AM Page 39