Onkyo TX-NR708 - Manual (Page 19)

19
En
Connect your components to the appropriate jacks. The default input assignments are shown below.
✔: Assignment can be changed (
➔
44).
Connecting Your Components
The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to
the MONITOR OUT V, MONITOR OUT S or the COMPONENT VIDEO MONITOR OUT, use the AV receiver’s
display when changing settings.
No. Jack Signal Components Assignable
AUX INPUT LINE IN Analog audio Portable audio player
VIDEO Composite video Camcorder, etc
AUDIO L/R Analog audio
COMPONENT
VIDEO IN 1 (BD/DVD) Component video Blu-ray Disc/DVD player ✔
IN 2 (CBL/SAT) Satellite, cable, set-top box, etc. ✔
MONITOR OUT TV, projector, etc.
DIGITAL COAXIAL IN 1 (BD/DVD) Digital audio Blu-ray Disc/DVD player
✔
IN 2 (VCR/DVR) VCR or DVD recorder/digital
video recorder ✔
IN 3 (CBL/SAT) Satellite, cable, set-top box, etc. ✔
OPTICAL IN 1 (GAME) Game console
✔
IN 2 (TV/CD) TV, CD player ✔
MONITOR OUT Composite video
and S-Video TV, projector, etc.
BD/DVD IN Analog audio,
composite video
and S-Video Blu-ray Disc/DVD player
VCR/DVR IN VCR or DVD recorder/digital
video recorder
CBL/SAT IN Satellite, cable, set-top box, etc.
GAME IN Game console
PC IN Analog audio Personal computer
TV/CD IN TV, CD player,
cassette tape deck, MD, CD-R,
Turntable
*1
PHONO IN Turntable *1
UNIVERSAL PORT Analog audio/
video Universal port optional dock
(UP-A1 etc.)
PC IN Analog RGB Personal computer *2
Multichannel input Analog audio DVD player, DVD-Audio or
Super Audio CD-capable player,
or an MPEG decorder *3
Front
Rear