Olympus CAMEDIA C-160 - Manual (Page 14)

14
En
Getting started
Setting the date and time
1
Open the lens barrier fully.
2
Press .
• The top menu is displayed.
3
Press í on the arrow pad to select MODE MENU.
4
Press Ññ to select the SETUP tab, then press í .
5
Press Ññ to select , then press í .
• The green frame moves to the selected item.
6
Press Ññ to select one of the following date formats: Y-M-D
(Year/Month/Day), M-D-Y (Month/Day/Year), D-M-Y (Day/ Month/
Year). Then press
í .
• Move to the year setting.
• The following steps show the procedure used when the date and time settings are
set to Y-M-D.
7
Press Ññ to set the year, then press í to move to the month
setting.
• To move back to the previous setting, press É .
• The first two digits of the year are fixed.
8
Repeat this procedure until the date and time are completely set.
• The camera only displays the time in the 24-hour time system. (“2 pm” would be
“14:00”.)
9
Press .
• For a more accurate setting, press when the time hits 00 seconds. The
clock starts when you press the button.
10
Close the lens barrier to turn the camera off.
6
Press Ññ to select a language, then
press .
7
Press again to exit the menu.
8
Close the lens barrier to turn the camera off.
SELECT GO
ENGLISH
FRANCAIS
DEUTSCH
ESPAÑOL
1 D395/C160_B-E1 2004.1.30 5:54 PM Page 14 (1,1)