Olympus 1020 - Manual (Page 63)

Ap
pend
ix
EN
63
Using the internal memory or card
You can confirm on the monitor whether the internal memory or card is being used during shooting
and playback operations.
Note
• Do not open the battery/card compartment cover while the
card access lamp is blinking, as this indicates that data is
being read or written. Doing so may damage the data in the
internal memory or the card and render the internal memory or
card unusable.
An AC adapter is useful for time-consuming tasks such as image downloads to a computer or when
running a slideshow for a long period of time. To use an AC adapter for this camera, the multi-
adapter (CB-MA1/accessory) is required.
Do not use any other AC adapter with this camera.
( The charger and AC adapter can be used in most home electrical sources within the range of
100 V to 240 V AC (50/60 Hz) around the world. However, depending on the country or area you
are in, the AC wall outlet may be shaped differently and the charger may require a plug adapter
to match the wall outlet. For details, ask at your local electrical shop or travel agent.
( Do not use travel voltage converters as they could damage your charger and AC adapter.
AC adapter
Using your charger and AC adapter abroad
10 M 10 M
2008.08.26 2008.08.26 12:30 12:30 44
100-0004 100-0004
IN
10 M 10 M
P
4 4 IN
Shooting mode Playback mode
Memory indicator
B:When using the internal memory
No display : When using a card
Card access lamp
d4344_4356_e_0000.book Page 63 Monday, December 17, 2007 9:13 AM