Onkyo CR-N1 - Manual (Page 60)

60
Specifications
Amplifier
CD Player
USB
Power output
(U.S. & Canadian models)
2 x 6.5 watts min., RMS at 8 ohms, 50 Hz–20 kHz, with no more than 0.6%
total harmonic distortion (FTC)
2 x 9.5 watts min., RMS at 4 ohms, 50 Hz–20 kHz, with no more than 0.8%
total harmonic distortion (FTC)
2 x 15 watts at 4 ohms (EIAJ)
Power output
(Other models)
2 x 10 watts at 4 ohms, 1 kHz (DIN)
2 x 8.5 watts at 6 ohms, 1 kHz (DIN)
2 x 7 watts at 8 ohms, 1 kHz (DIN)
2 x 6.5 watts min., RMS at 8 ohms, 1 kHz, no more than 0.6% THD (FTC
rating)
2 x 15 watts at 4 ohms (EIAJ)
Dynamic power
2 x 15 watts at 4 ohms
2 x 9 watts at 8 ohms
Total harmonic distortion 0.4% at 5 watts output into 4 ohms, 1 kHz
IM distortion 0.4% at 5 watts output into 4 ohms, 1 kHz
Damping factor
25 at 4 ohms
50 at 8 ohms
LINE IN sensitivity and
impedance
500 mV, 47k Ω
Frequency response 10 Hz–20 kHz, +3/–3 dB
Acoustic presence
1: +6.0 dB at 80 Hz
2: +10.0 dB at 80 Hz
Signal to noise ratio 95 dB (IHF-A)
Muting –50 dB
Signal readout system Optical non-contact
Reading rotation Approx. 500–200 rpm (constant linear velocity)
Linear velocity 1.2–1.4 m/s
Error correction system Cross interleave Reed Solomon code
D/A converter 1 bit
Digital filter 352.8 kHz, 8-times oversampling
Number of channels 2 (stereo)
Frequency response 5 Hz–20 kHz
Wow & flutter Below threshold of measurability
Connection method USB (Universal Serial Bus) Ver 1.1
Sampling rate (input) 32/44.1/48 kHz compatible
Frequency response 5 Hz–20 kHz