Onkyo CR-N1 - Manual (Page 33)

33
Basic operation
The following input sources can be selected:
1 Press the INPUT button on the CR-N1
repeatedly, or use the CD, LINE, FM, AM,
or USB INPUT SELECTOR buttons on the
remote controller to select the required
input source.
The name of the selected source appears
on the display. The CD indicator
appears when CD is selected.
The volume can be set by using either the
CR-N1 or the remote controller.
1
To set the volume, use the VOLUME UP/
DOWN (
/ ) buttons on the CR-N1 or
remote controller.
Use the VOLUME UP ( ) button to
increase the volume, and the VOLUME
DOWN ( ) button to decrease it. The vol-
ume level setting is shown on the display
for four seconds.
Selecting input sources
Input source Description
CD CR-N1’s CD player
LINE Rear panel LINE inputs
USB Rear panel USB port
FM CR-N1’s FM radio
AM CR-N1’s AM radio
Remote controller
CD
Setting the volume
VOLUME UP /
VOLUME DOWN
INPUT
SELECTOR
INPUT
VOLUME UP /
VOLUME DOWN
Remote controller