Onkyo CR-N1 - Manual (Page 42)

42
Listening to the radio
The FM Auto function searches for all receiv-
able FM stations and assigns them to presets
automatically.
Note that previously stored presets will be
overwritten by this function.
1
Select FM by pressing the INPUT button
on the CR-N1 repeatedly until “FM”
appears on the display, or press the FM
button on the remote controller.
2
Press and hold down the MEMORY but-
ton until the frequency value begins to
change (the MEMORY indicator
appears). Note that you must hold down
the MEMORY button until after “AUTO”
stops flashing).
The entire FM frequency band is scanned
from low to high and up to 30 stations
are assigned to the presets automatically.
The process is complete when the fre-
quency value stops changing.
You can store up to 30 of your favorite AM
and FM radio stations as presets.
1
Tune into the station that you want to
store as a preset.
See “Tuning the radio” on page 41 for
more information.
2
Press the MEMORY button (the MEMORY
indicator appears and “– –” flashes).
Presetting FM stations
automatically
INPUT
MEMORY
FM
Remote controller
Hold down
Scanning
MHz
MEMORY
MEMORY
Presetting FM/AM stations
manually
STEREO
MEMORY