Onkyo CR-N1 - Manual (Page 40)

40
Playing CDs
5
Once you’ve memorized all your tracks
and are ready to start playback, press
the PLAY/PAUSE (
) button on the
CR-N1, or the PLAY ( ) button on the
remote controller.
Tracks are played in the order memorized,
and playback stops when the last memo-
rized track has been played.
6
To stop Memory Playback, press the
STOP (
) button.
To start Memory Playback again, press the
PLAY/PAUSE (
) button again.
7 To cancel Memory Playback, press the
MEMORY button (the MEMORY indica-
tor disappears).
The memory contents are stored until the
CD is ejected or the CR-N1 is turned off.
Memory Playback can be combined with
Random Playback, so that memorized
tracks play in a random order. Memory
Playback can also be combined with
Repeat Playback, so that memorized
tracks play repeatedly. In fact, Memory
Playback can be combined with both Ran-
dom Playback and Repeat Playback, so
that memorized tracks play in a random
order repeatedly.
In addition to displaying the elapsed time of
the track currently playing, you can also
check the remaining time of the current
track, the entire disc, or memorized tracks in
Memory Playback. In Memory Playback, you
can also check the current program number.
1
Press the CR-N1 DISPLAY button repeat-
edly to cycle through the following
options.
If the number of the track currently playing
is higher than 20, or the total play time of
the program is greater than 99 minutes and
59 seconds, “--:--” may appear on the display.
Displaying track times &
program numbers
Elapsed time: current track
CD play/pause:
Memory Playback:
Remaining time: current track
(“S” indicator)
Remaining time: total disc
(“T” indicator)
CD stop:
Remaining time: current track
(“S” indicator)
Remaining time:total disc (“T” indicator)
Elapsed time: current track
Remaining time: current track
(“S” indicator)
Remaining time: memorized tracks
(“T” indicator)
Current program number