Omron C-series - Manual (Page 13)

1-4 Section General Specifications
3
1-3 Repeater Units
Repeater Units are used when the number of Optical Transmitting I/O Units, Op-
tical Slave Racks, etc., connected in series exceeds 32. Insertion of a Repeater
Unit after the 32nd Unit allows the connection of additional Units. The following
Repeater Units are used with the cables shown here:
Model Applicable Cables
3G2A9-RPT01-P APF/PCF
3G2A9-RPT01 PCF
APF: All-plastic optical fiber cable
PCF: Plastic-clad optical fiber cable
1-4 General Specifications
Basic specifications for the Link Adapters and Repeater Units are shown in the
following table:
Link Adapters
Model Function Connection Supply voltage Operating
voltage range
Power
consumption
Weight
AL001 Branching RS-422 cable RS–422 cable
RS-422
cab;e
RS-422
cable
Not necessary --- --- 250 g
max.
AL002-PE Branching optical fiber
(APF/PCF) cable Optical fiber (APF/PCF)
Optical fiber
(APP/PCF)
Optical fiber
(APF/PCF)
100 to 120/200
to 240 VAC or
12 to 24 VAC/
DC 85 to 132/170 to
246 VAC or 10.2
to 26.4 VAC/DC 10 VA max. 900 g
max.
AL002-E Branching optical fiber
(PCF) cable Optical fiber (PCF)
Optical fiber
(PCF)
Optical fiber
(PCF)
AL004-PE Converting between opti-
cal fiber (APC/PCF) and
wire (RS-232C/RS-422)
cable RS–422 cable
Optical fiber
(APF/PCF)
RS-232C
cable
110 to 120/
220 to 240 VAC 94 to 132/
187 to 264 VAC 10 VA max. 1 kg
max.
AL004-E Converting between opti-
cal fiber (PCF) and wire
(RS-232C/RS-422) cable RS–422 cable
Optical fiber
(PCF)
RS-232
cable
AL005-PE Converting between opti-
cal fiber (APF/PCF) and
crystal optical fiber
(AGF) cable Optical fiber (APF/PCF)
Optical fiber
(AGF)
100 to 120/200
to 240 VAC or
12 to 24 VAC/
DC 85 to 132/170 to
254 VAC or 10.2
to 26.4 VAC/DC 10 VA max. 1.5 kg
max.
AL005-E Converting between opti-
cal fiber (PCF) and crys-
tal optical fiber (AGF)
cable Optical fiber (PCF)
Optical fiber
(AGF)
AL006-PE Converting between opti-
cal fiber (APF/PCF) and
crystal optical fiber
(AGF) cable Optical fiber (AGF)
Optical fibber
(APF/PCF)
Optical fiber
(AGF)
100 to 120/200
to 240 VAC or
12 to 24 VAC/
DC 85 to 132/170 to
264 VAC or 10.2
to 26.4 VAC/DC 10 VA max. 1.5 kg
max.
AL006-E Converting between opti-
cal fiber (PCF) and crys-
tal optical fiber (AGF)
cable Optical fiber (AGF)
Optical fiber
(PCF)
Optical fiber
(AGF)
AL007-P Used exclusively for
Wired Remote I/O Sys-
tems. Converts between
optical fiber (APF/PCF)
and wire (RS-485) cable
Optical fiber
(APF/PCF)
RS-485
100 to 200 VAC 85 to 264 VAC 10 VA max. 1 kg
max.
APF: All-plastic optical fiber cable
PCF: Plastic-clad optical fiber cable
AGF: Crystal optical fiber cable (GI 50 or 125)