Omron Healthcare HR-100C - Manual (Page 12)

12
BASIC SETTING INSTRUCTIONS
1. Press and hold the MODE button to enter the setting mode.
2. Press the SET button to adjust the blinking digits.
Press and hold the SET button to increase the digits faster.
3. Press the MODE button to go to the next setting option or
exit the setting mode.
NOTE: If no button is pressed the monitor will automatically
exit the setting mode after 60 seconds.
SETTING THE TIME AND DATE
Press the MODE button to select the Time of Day
operating mode.
1. Press and hold the MODE button.
12/24 hr blinking
2. Press the SET button to choose the 12-hour
AM/PM or 24-hour universal clock. Press the
MODE button.
Hour blinking
3. Press the SET button to adjust the hour.
Press the MODE button.
Minutes blinking
4. Press the SET button to adjust the minutes.
Press the MODE button.
Month blinking
5. Press the SET button to change the month.
Press the MODE button.
Date blinking