Omega Speaker Systems OS530LE - Manual (Page 44)

2-29
Using the Handheld Infrared Thermometer
2
2.3.16 Erasing the Temperature Data from Memory
The user can erase all 800 temperature data points in
memory at any time by using the following procedure:
1. Pull the trigger and press the key. The
icon will appear.
2. Press the
key until reaching the MEM or LOG
disply mode.
3. Press the then keys in rapid sequence. The
display shows ERASE on the top and it will beep to
indicate that the stored data is erased.
Erasing the temperature data does not erase or
reset Emissivity, High and Low Alarm setpoints,
printing interval and Ambient Target Temperature
compensation
4. After all data is erased from memory, double click
trigger to unlock the trigger.
FUNC
LOCK
LOCK
NOTE