Omega Speaker Systems OS530LE - Manual (Page 38)

2-23
Using the Handheld Infrared Thermometer
2
Settings Menus
In the settings menu, you can do the following:
• Select audible indication. The PC will beep every time the temperature
goes into alarm conditions.
• COM port auto detect. The program shows the available COM ports for
your selection.
• Selecting the “Show History Viewer”, provides a log of all the events
happening with the application such as high & low alarm events, start &
stop of the application, etc.
• Selecting the “Save to File”, allows you to save the charted data coming
from the thermometer to a data file. When you stop recording, the
program will ask if you would like to save the data.
• Select your chart time base from 1 minute per frame up to 1 day per
frame.
• Select “Auto Scale” or specify your upper & lower Y axis values for
custom scaling.
• Set the following parameters:
1. Emissivity
2. High and Low alarm set points as well as enable/disable
3. Temperature Engineering unit (ºF or ºC)
4. Data transmission interval in seconds
5. Target Ambient temperature
• Download the recorded temperature data from the thermometer to a text
file.
• Erase the recorded temperature data from the thermometer.
Figure 2-10. Settings Menu