Oricom BB100 - Manual (Page 22)

- 22 -
Reset to factory default settings
This feature will restore the factory default settings of your phone. All programming earlier done like setting
the ringing volume, ringing melody, external call melody, clear the phonebook, clear the LNR, etc. will be
erased.
1. Press OK button. ‘ ’ is displayed.
2. Use DOWN button to scroll to
.
3. Press OK button, is displayed.
4.
Use DOWN button to scroll to the option .
5. Press OK button. The LCD shows .
6. Enter the base PIN number from the numeric keypad.
7. Press OK button.
Then the handset and base will apply default settings and make a software reset.
Quick default settings
If you loose your PIN code, the following procedure restores default settings on handset and base.
Note: the base should be connected to power during this process.
1. Remove the handset batteries. Wait for 5 seconds, Insert batteries and closely watch the display
on the handset.
2. Press star key (*) on the handset keypad immediately whilst the handset is initiating (i.e. when the all
the icons are showing on handset LCD.)
3. The LCD will show .
4. Press the OK button. Wait for about 3 seconds.
5. Then Base will reset first followed by the handset. After the handset and base reset, the unit will go into
the standby mode.