beautypg.com

Out of range warning, Using the phone book, Storing an entry in the phone book – Oricom BB100 User Manual

Page 10: Standby mode, 10 out of range warning

background image


- 10 -

Page function

If you lose or misplace your handset you can press the ‘Page’ on base to relocate it.

Press the Page button on the base. The paged handset will ring. The In

Use LED on the base will flash and

icon will blink in the LCD screen of

handset.

To stop paging, press the PAGE button on the base again, or press any
key on the handset. Note: it will stop automatically after 30 seconds.

Out of range warning

During standby:
The range symbol

on the display flashes when your handset loses its link with the base. When your

handset re-establishes its link with the base the range symbol becomes steady.

During a call:
When the handset is too far away from the base during a call, an alert tone (if you sent the alert tone on) is
repeatedly sounded in the handset. Bring the handset closer to the base so that the signal gets stronger. If
you do not bring the handset back in range, your call will be disconnected.

USING THE PHONE BOOK


Note: You can store up to 25 phone records in the handset with up to 12-characters for name, and up to 25
digits for numbers.

Storing an entry in the phone book
1.

Press OK button.

is displayed.

2.

Press OK button again.

is displayed.

3.

Press OK button again.

is displayed.

4.

Input name (max. 12 characters) from the alphanumeric keypad.


** Using the handset keypad to enter characters:

- You can enter characters by pressing the key with the required character on a number of times

according to its position in the string of characters on the key legend. E.g. for ‘C’, press ‘2’ three times,
for ‘S’ press ‘7’ four times, for ‘J’, press ‘5’ once.

- If you wish to enter successive characters which are on the same key, you must wait for the cursor to

move to the next location on the screen before entering the next character.

- To enter a space, press ‘1’ once. To enter ‘-‘, press ‘1’ twice. To enter ‘1’, press this key thrice.
- If you make a mistake while entering the name or number, press CANCEL to delete the last character

entered. Repeat for any earlier incorrectly entered characters and then re-enter the required
characters.

Pressing of Digits

Digit

1x 2x 3x 4x 5x

1 space -- 1

2 A B C 2
3 D E F 3
4 G H I 4
5 J K

L 5

6 M N O 6
7 P Q

R S 7

8 T U

V 8

9 W X Y Z 9
0 0