Listening to the radio, Am/fm frequency step setup – Onkyo 29344934 User Manual
Page 48
48
Listening to the Radio
For AM/FM tuning to work properly, you must specify
the AM/FM frequency step used in your area. Note that
when this setting is changed, all radio presets are
deleted.
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
AM/FM Frequency Step Setup
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
2
Use the Up and Down [ ]/[ ]
buttons to select “8.Hardware”,
and then press [ENTER].
3
Use the Up and Down [ ]/[ ]
buttons to select “FM/AM”.
SETUP
RECEIVER
ENTER
4
Use the Left and Right [
]/[
]
buttons to select:
200k/10k:
Select if 200k/10k steps are
used in your area.
50k/9k: Select if 50k/9k steps are used
in your area.
5
Press the [SETUP] button.
Setup closes.
HT-S5200_En.book 48 ページ ２００９年３月９日 月曜日 午後４時３１分