Recording – Olympus DS-40 User Manual
Page 26

26
2
Pause
Press the REC button while recording.
➥
“Rec Pause” will flash on the display.
• The recorder will time out after 2 hours when left in
“Rec Pause”.
Resume Recording
Press the REC button again.
➥
Recording will resume at the point of
interruption.
Recording
Recording
Notes
• If you select a folder other than
A through E and press the REC button, an “Illegal Folder” message
will flash. Select a folder from
A through E and start recording again.
• To ensure recording from the beginning, start speaking after you see the red record/play indicator light on.
• A beep will sound when remaining recording time reaches 60 seconds, 30 seconds, and 10 seconds
while recording.
• When remaining recording time is less than 60 seconds, the record/play indicator light starts flashing in
red. When the recording time is decreasing to 30 or 10 seconds, the light flashes faster.
• “Memory Full” or “Folder Full” will be displayed when the memory or folder capacity is full. Delete any
unnecessary files before recording any further (
☞ P.47).