Olympus DS-40 - Manual (Page 13)

13
1
Inserting Batteries
Inserting Batteries
1 Lightly press down on the arrow and slide the
battery cover open.
2 Insert two AAA alkaline batteries, observing the
correct polarity.
3 Close the battery cover completely by pressing to
the direction A, then sliding to the direction B.
4 Slide the POWER/HOLD switch in the direction
indicated by the arrow, and turn the power on.
If the “hour” indicator flashes in the display, see “Setting Time/
Date (Time&Date)” (
☞P17).
Replacing batteries
The battery indicator on the display changes as the batteries
lose power.
→ → →
When appears on the display, replace the batteries
as soon as possible.
When the battery is too weak,
“Battery Low” appears
on the display and the recorder shuts down. When changing
batteries, AAA alkaline batteries or Olympus Ni-MH batteries
(
☞P14) are recommended.
A A
B B
1
2
3
4