Optimus STAV-3670 - Manual (Page 9)

9
Preparing Your Receiver
Connecting Program Sources You can connect up to five external program sources to your receiver.
Connecting a Turntable
Connect a turntable with a magnetic cartridge only. Some older turntables use a
ceramic-type cartridge that does not work with this system.
Connect the turntable’s left and right cables to the receiver’s L (left) and R (right)
PHONO jacks. Then connect the turntable’s ground wire to the receiver’s SIGNAL
GND terminal.
Connecting a CD Player
To connect a CD player to the receiver, connect the CD player’s left and right
output jacks to the receiver’s
L and R CD IN jacks.
Connecting Cassette Decks
You can connect cassette decks to the VCR/TAPE 1 and the TAPE 2 MONITOR jacks.
Connect the cassette deck’s output jacks to the VCR/TAPE 1 IN (audio) or TAPE 2
MONITOR PLAY jacks, and connect the cassette deck’s input jacks to the VCR/TAPE
1 OUT (audio) or TAPE 2 MONITOR REC jacks.
You can connect a third cassette deck (for playback only) to the LD/DVD IN
(audio) jacks.
SIGNAL
GND
PHONO
TAPE2
MONITOR CD
LD/
DVD
VCR/
TAPE 1
VIDEO
CONTROL
REC PLAY
L
R
L
R
IN OUT IN IN IN
OUT
OUT IN IN TO MONITOR TV
VIDEO OUT
R
L
L
R
REC PLAY
LINE
REC PLAY
INPUT OUTPUT
OUT PUT
L
R
CD
L
R
REC PLAY
LINE
REC PLAY
INPUT OUTPUT
L
R
L R
R L R L
R L
R L R L
L R L
R
R
L
Turntable Cassette Deck Cassette Deck CD Player
Note: Use shielded audio cables with
phono connectors for all audio connec-
tions.
Note: If you place the cassette deck di-
rectly above, below, or to the left of the
receiver, the receiver could interfere with
the cassette deck’s operation. If possi-
ble, position the cassette deck to the
right of the receiver or locate it away
from the receiver.